The KA2

The V2 control panel has a leak-detected LED per zone, a mains healthy LED, and a sensor fault/healthy red/green LED. In the event of a leak, the alarm LED will flash red, the buzzer will sound, the valve will operate (if connected) & the relays will energize. Pressing the mute bu on will silence the buzzer. The Leak LED will remain illuminated un l the sensor has been dried. In the event of a sensor fault, the sensor fault LED will change green to red and the internal buzzer will sound fault relay energize. The mute button can be pressed to silence the buzzer. The fault LED will remain red un l the sensor fault has been rectified. The panel will self-reset in both instances unless the alarm reset link is set to latch. The V2 control panel test button can be pressed to test the faciality of all LED’s. 

You can either buy our panels on their own or as a part of a kit for all your leak detection needs